ACSM25

2500 CFM Media Filtration System with 3/4 HP Direct Drive Fan

$ 1,659 ACSM25 QTY:
$ 1,764 w/ Charcoal After Filter QTY:
$ 2,121 w/ HEPA After Filter QTY:
$ 2,016 W/ Wrap Around Pre-filter w/ hinges on left QTY:
$ 2,016 W/ Wrap Around Pre-filter w/ hinges on right QTY:
   
$ 13 W.A.R. Filter WAR Replacement Fiber Filter 25"H x 60"L x 2" Thick QTY:
$ 19 24 x 24 x 4" Pleated Pre-filter with Beverage Board Frame QTY:
$ 64 24 x 24 x 4" Box of 6 Pleated Pre-filters QTY:
$ 92 24 x 24 x 2" Charcoal After-filter - 50% Bypass QTY:
$ 105 24 x 24 x 36" 95% 8 Pocket Bag Filter (96ft2) (Replaces 65% Bag) QTY:
$ 109 24 x 24 x 4" Aluminum Mesh Pre-filter QTY:
$ 109 24 x 24 x 4" Aluminum Mesh Pre-filter Upgrade Replaces Pleated QTY:
$ 126 24 x 24 x 2" Galvanized Mist Eliminator QTY:
$ 231 24 x 24 x 36" 65% 8 Pocket Bag Filter (96ft2) (Case of 4) QTY:
$ 242 24 x 24 x 15" 95% 12 Pocket Bag Filter (60ft2) (Case of 4) QTY:
$ 292 24 x 24 x 2" Charcoal After-filter - 50% Bypass (Case of 12) QTY:
$ 302 24 x 24 x 36" 95% 8 Pocket Bag Filter (96ft2) (Case of 4) QTY:
$ 310 20x20x12" HEPA M-25 HEPA Replacement Filter QTY:
   
$ 46 Eyebolts 4 Eyebolts (Installed on unit at the Factory) QTY:
$ 46 Spray Can Touch-up Paint (Circuit Blue) QTY:
$ 88 Mounting Kit Chain, Q-Links, & eyebolts QTY:
$ 92 "L" Brackets M-25 Mounting Brackets (set of 2) QTY:
$ 137 Silencer Reduces Noise by 6-8 Decibels (4 way Directional Louver) QTY:
$ 139 Silencer w/Grill Reduces Noise by 10-12 Decibels (Non-Directional Grill) QTY:
$ 151 Strut Channel 28" Hanging Brackets for Air King M-25/30/32/30C/40/45 (Strut Channel) QTY:
$ 172 Pressure Gage Magnehelic Pressure Gage 0-2" W.C. (factory installed) QTY:
$ 357 Wrap-A-Round Prefilter Cage, Filter, Hinge & Latch Kit QTY:
   

Clean air for offices, meeting rooms, bowling centers, cocktail lounges, bingo halls, clubs, computer rooms and more. Utilizing only the high test quality components housed in a heavy-duty 16 gauge steel cabinet and finished with chemical resistant paint, each unit is a self-contained system for use individually or in groups.

Low initial price and daily operational and maintenance costs are far less than more expensive electrostatic air cleaners making our ACSM25 system a bargain for any size installation.

A large centrifugal type blower draws the contaminated air from the room through a set of highly efficient micro-glass filters that separate the sub-micron particles from the air stream.

The cleaned air is then discharged back into the room for reuse. No ductwork is required, and there is no loss of neither heat or air conditioning.

Optional charcoal filters are available for odor control and a HEPA type tilter is available for those areas which demand the ultimate in clean air.

Installation of your new ACSM25 may be accomplished in a variety of ways.

The ACSM25 is designed for chain-hanging, rod-mounting, or a wall bracket installation to suit your individual application.

The ACSM25 operates on ordinary 115 Volt circuits and requires no special wiring.

  • Welding smoke / Fumes
  • Grinding Dust
  • Bondo Dust
  • Diesel Smoke
  • Oil Mist
  • Printing Powder
  • Plastic Dust
  • Other Smoke / Dust Problems
  • Easy to install
  • High Efficiency
  • Four-way Louvers
  • Long Filter Life
  • Low Operating Costs
  • High Volume
  • 16 Gauge Cabinet
  • Variety of Filters